Periodic Inspection of Electrical Installations

Check out the service information about periodic inspection of electrical installation. Share your request with your location and destination date.

Published in the Official Gazette No. 25 April 2013 date and 28628, it is necessary to conduct examination and report the examination of the Electrical Facilities at least 1 time per year by the Health and Safety Terms Regulation.

  • Ground Measurements
  • Electrical Internal Installation Controls
  • Electrical Board Controls
  • Imaging With Thermal Camera
  • Cathodic Protection Measurements
  • Paratoner Controls
  • Paratoner Domain Account
  • Insulation Resistance Measurements
  • Continuity Test Measurements
  • Leakage Current Test Measurements
  • High Voltage Facilities Operating Liability
  • Generator Controls
  • Battery/Accessories Controls

Standards & Regulations:

  • Health and Safety Terms Regulation on the Use of Work Equipment published in the Official Gazette No. 25.04.2013 and 28628
  • Grounds Regulation on Electrical Facilities published in the Official Gazette dated 21/8/2001 and 24500
  • Electricity Force Current Facilities Regulation published in Official Gazette No. 30/11/2000 and 24246
  • Electricity Internal Facilities Regulation published in the Official Gazette No. 4/11/1984 and 18565
  • TS EN 62305 Standard

You can review the following services listed as separate areas in the document on the relevant pages of equipment, type of inspection and standard information.

Source document and scope information

AB-0075-M Accreditation Certificate and Scope (PDF): TS EN ISO/IEC 17020:2012A Type Inspection Organization; revision 23, 09.02.2026. End of validity specified in the document 19.07.2026.

The specified validity period of this document copy expires. Current accreditation document and scope to be applied to your request is confirmed during the service planning.

Who is it for?

  • Product owners and businesses planning control of work equipment.
  • Organizations looking for lifting equipment, pressure vessel or installation control.

Service scope

  • Periodic Inspection of Electrical Installations

Plan your request with us

Prepare before requesting

  • Equipment type and acid
  • Facility location
  • Previous check information and target date if required
Request a service

How will we proceed?

  1. Share your needs

    Tell us the service required, the location and your target date.

  2. Let us clarify the scope

    Let us review your request based on the product, system or equipment to be assessed and the information required.

  3. Let us plan the next step

    Let us contact you about the application, assessment or training steps appropriate to the scope.

Frequently asked questions

How can I submit a request for Periodic Inspection of Electrical Installations?

You can contact the contact page from the service request link. You can clarify your request by sharing the scope of the service you choose, location and destination date.

What information should I prepare before request?

Equipment type and acid; Facilities location; If you have previous control information and target date. The required application information is cleared according to the relevant service scope.

PDF preview

If the preview is unavailable, download the document or open it in a new tab.