Verify your certificateInspecco Portal
English
TürkçeEnglishDeutschEspañolFrançaisPortuguês中文日本語한국어العربية
InspeccoWE BUILD TRUST
Search

CE Certificate for Machines

CE Certificate service for machines AB-0130-U Check the scope of the Machine Safety Regulation (2006/42/AT) in the certificate and the related product limits.

Scope of accreditation in the certificate

The product groups and assessment procedures in the Rev.02 certificate dated 11.01.2024, issued under TS EN ISO/IEC 17065:2012, are shown below.

TÜRKAK · AB-0130-UTS EN ISO/IEC 17065:2012 · Rev.02 · 11.01.2024
View certificate and scope annex

Machine Safety Regulation (2006/42/AT)

Source: AB-0130-U, Rev.02 · Certificate annex 2/7 · PDF page 3

Products defined in the document

  • 1. Single or multi-blade circular saws used to process materials in wood or similar physics properties or materials in meat or similar physics:
    • 1.1 Sawing machines, which have fixed knives during cutting, fixed bed or supported, is expected by hand or with a detachable power drive of the workpiece.
    • 1.2 Sawing machines with fixed knives during cutting, hand-run advanced backward moving saw trolley or coffee table.
    • 1.3 Saw machines made with fixed knives during cutting, a combined mechanical device for feeding workpiece, loading and/or unloading manually.
    • 1.4 Saw machines made with moving knives during cutting, mechanical movement of the blade, loading and/or unloading manually.
  • 2. Hand-feeded plan for wood processing.
  • 3. A mechanical combined feeding device for wood processing, manual loading and/or discharged, surface-processed thickness planing from one side.
  • 4. used to process materials or materials in the physical properties of wood or similar, or materials in meat or similar physics, hand-loaded and/or unloaded strip saw thesis:
    • 4.1 Saw thesis, which has fixed knives during cutting, has a bearing or support that can be fixed or backward moving for the workpiece.
    • 4.2 Saw thesis with saw blades mounted on a moving car forward back.
  • 5. Used to process materials with wood and similar physics properties, combined machine types referred to in paragraphs 1-4 and 7.
  • 6. With a variety of tool holders to handle wood, hand-feeded fasteners.
  • 7. Vertical national molder milling to process materials with wood and similar physics properties.
  • 9. Used for cold processing of metal materials, hand-loaded and/or unloaded, the course of moving work parts from 6mm and the speed is higher than 30mm/s, presss, including abkant presses.
  • 16. Vehicle maintenance lifts.
  • 17. It is used for the removal of contacts or people and items, and the tertibats with a risk of falling from a lower than three meters.
Machines · module / procedure scope in the certificate
Module / procedureAssessmentBasis
AT Tip İncelemesiEC-type examination of machine groups defined in the documentAdditional IX; Article 13 (3) b) and Article 13 (4) a)

This scope applies only to Notified Body activities in the mandatory regulatory field. Additional audit document: EA 2/17.

The first accreditation date in the certificate is 22.01.2020, the validity end is indicated as 21.01.2028. The validity depends on the condition of maintaining the compliance of the relevant standard, regulations and directives of the organization.

2006/42/AT Machinery Safety Regulation is the mandatory main legislation in the European Economic Area (EEA) and Turkey. This regulation defines the minimum safety requirements for all people and the environment, which may be in contact with the machine, mainly for employees.

Machinery

The CE mark shows that the machine meets the requirements of 2006/42/AT Machinery Safety and is conduited to the machines by the machine manufacturer. CE marking is a mandatory requirement for the machine to be sold and used in Turkey and EEA countries.

Specialized notified body for Machines : Inspecco

InspeccoIt is a notified body specialized in this field, providing testing, inspection and certification services for machines. The ID number given by the EU commission is 2459.

We provide services in the fields of testing, examinations, evaluation of the qualification of the technical file and documenting the conformity of the machines.

Trust Build Ederiz / We Build Trust

Our experienced technical experts support machinery manufacturers and importers in order to examine the machines according to regulations, harmonize standards and the latest possibilities of technology and to ensure compliance for European and Turkish markets. In this way, manufacturers and importers can work safely in Europe and Turkey markets, Inspecco. They can trust customers with the documents that will provide.

Based on 2006/42/AT Machinery Safety Management, the basic services we provide are:

  • Regulation of EC-type examination certificate for machines under Additional -IV
  • AT Regulation on Compliance Certificate
  • Technical file compliance control
  • Making electrical safety tests
  • Making noise measurements
  • Conducting vibration measurements
  • Risk analysis
  • Light curtain (ESPE) measurements
  • EN 13849-1Making the appropriate PL account
  • 2014/35/AB LVD Directive CE Certification
  • 2014/30/EU EMC Directive CE Certification
  • Compliance controls of machines in use

To show that machinery is compliant with European Union legislation, contact us to gain advantage in Turkey and European markets.

Press machines ce

Press Machines
CE Certificate

Yuksekte calisma platforms

CE Certificate for High Working Platforms

Asili erisim systems ce

Hanging Access Systems
CE Certificate

Machine crush

Packaging & Filling
Log in CE Certificate

Vehicle lifting

Vehicle Lifting Receipt. CE Certificate

Machines

Machines in Use
CE Certificate

Machine crush

In Additional-IV
Defined Machines

Asili erisim systems ce

2006/42/AT Machinery Safety Regulation

Who is it for?

  • Manufacturers and organisations planning product conformity assessment within the scope of CE Certificate for Machines.

Service scope

  • Machine Safety Regulation (2006/42/AT): EC-type examination.

Plan your request with us

Prepare before requesting

  • Certification subject and the applicable standard, if any
  • Product or organizational scope
  • Company, location and target date
Request a service

How will we proceed?

  1. Share your needs

    Tell us the service required, the location and your target date.

  2. Let us clarify the scope

    Let us review your request based on the product, system or equipment to be assessed and the information required.

  3. Let us plan the next step

    Let us contact you about the application, assessment or training steps appropriate to the scope.

Frequently asked questions

How can I submit a request for CE Certificate for Machines?

You can contact the contact page from the service request link. You can clarify your request by sharing the scope of the service you choose, location and destination date.

What information should I prepare before request?

Certification subject and related standard; Scope of product or organization; Company, location and destination date. The required application information is cleared according to the relevant service scope.

Where can I check the accreditation scope?

You can check the relevant scope in the source documents on our Accreditations and Documents pages.

PDF preview

If the preview is unavailable, download the document or open it in a new tab.